AP5

Description

Automatic winding and stamping machine for the production of coiled and stamped armature cores, especially due to shape or reduced space applications (flat motors)
The key to economically produce motors with disc rotor is a fully automatic procedure to manufacture coiled and stamped armature cores required for the rotors and stators in the axial airgap motors technique.
Core capacity from Inside diameter ca. Ø 130 up to Outside diameter max.600 mm

APPLICATION DATA

Picture Title Description Performance Consume
TURBINE Wind generators. +250% more powerfull compared to conventional engine
ELEVATORS Ideal for reduced space,Hubmotor applied to the lift, no need to make a machine room +100% space gained
AIRPLANES In wheel motor for Taxi or landing operation saving 1/3 of fuel used to landing.

Technical data

Stamping motor 1,5 kW - 3 x 220/400V - 50-60Hz
Minimum number of slots 24
Maximum number of slots 90
Inside diameter min 130 mm
Outside diameter 250 - 500 (max 600 mm)
Band width 90 mm
Band quality Dynamoband or similar, weldable quality
Punching frequency Adjustable from 3 to 6 strokes/sec.
Band thickness 0.2 – 0.35 - 0.50 - 0.65 mm
Weight ca. 1700 kg
Overall dimensions ca. 2100 x 1300 x 1800

 

The slotline is determined by the control system on the machine. The following five configurations are possible.

c

: straight to centre line

d

: straight eccentric to the right

e

: straight eccentric to the left

f

: spiral to the left

g

: spiral to the right

APPLICATIONS

  • Electro-motion techniques for household machine, e.g. washing machines, tumblers kitchen appliances, etc.
  • Fans, airblowers, glandless pumps with flat sealing disc.
  • High-output drive motors for machines and automotive industry.
  • Electromagnetic brakes for machine drive motion techniques.
  • Eddy-current brakes for machines and automotive industry.

AP MACHINE IN 1 MINUTE

Contact Us